Day 100 - Go Bears

Venerdì 29 Giugno 2012, 20:10

When I was told me and Luisa successfully placed in my University’s ranking list about Marco Polo's Program (and so allowed to spend some time abroad developing our research) I was very happy, of course. But the reason of my happiness was we were going to leave for Berkeley.

 

Day 81 - Wandering in SFO

Domenica 10 Giugno 2012, 18:07

San Francisco, the most European of American cities... I'll miss you so much...

More pictures.

 

Day 72 - Back in Silicon Valley

Venerdì 08 Giugno 2012, 23:38

After six years from my first trip here, I came back to where it all started! Revolution, at the Computer History Museum was an amazing show just in the middle of a God blessed land, even if a lot of startups around closed compared to 2006.

Some pictures if you want to read more...

 
Scritto da simon | | Nessun commento

Day 70 - Report and images from last Cal Day

Venerdì 08 Giugno 2012, 04:59

On Saturday, April 21, from 9 a.m. to 4 p.m., the University of California, Berkeley, opened the campus to the public, offering free access to more than 370 events at labs, performance halls, museums, classrooms and more. An annual event, Cal Day was expected to attract 40,000 visitors this year.

 
Scritto da simon | | Nessun commento | Tag usati: ,

GreenSpider 1.0

Martedì 22 Maggio 2012, 09:10

GreenSpider release 1.0.2 is officially out for beta-testing, it can be downloaded here.

GreenSpider is a plugin developed by Simone Garagnani for Autodesk Revit 2012, taking advantage of .NET libraries 3.5 and C# programming code. Once installed through downloaded file, GreenSpider can be accessed in Revit mass modeling environment.

In order to import geometries, especially from Rhino+Grasshopper or laser scan segmented and decimated point clouds, a file called points.gsp has to be prepared and copied in GreenSpider directory (C:\greenspider, by default installation). GSP is a plain text file format where XYZ numerical values representing geometric vertexes are separated by semicolons, while commas are used for decimal marks.

This plugin operates Metric conversion for Revit so GSP values are required in centimeters.GreenSpider is still a prototype so it’s possible to run two commands identified by two different icons in Revit: GSpoints and GScurves. The first import the vertex point cloud, while the second traces a spline interpolation among imported points, in order to build surfaces after several points.gsp imports.

GreenSpider searches for points.gsp file in proper directory. A little piece of software, called GreenSpider Translator and developed by Simone Garagnani as well, can be downloaded and installed in order to convert XYZ vertex files with no normals into the correct file format used by GreenSpider plugin into Autodesk Revit. GreenSpider Translator opens files, recognizes them, then parses them in correct format, copying a translated file renamed points.gsp into C:/greenspider, where the plugin can easily find it. Importing different set of point clouds is now easier since the Translator can be reset each time, erasing previous GSP files already acquired by Revit.

Here’s the GreenSpider introductory page.


Release Note for old systems: GreenSpider r1.0.2 has been coded for Autodesk Revit 2012 running on Windows 7 machines. The installer could fail copying files on old computers running WinXP (not supported by GreenSpider but working flawless with its features). In case of troubles, please continue the installation process until the end, regardless of warnings and error messages. Then copy this file in your C:\Documents and Settings\USER\AppData\Autodesk\Revit\Addins\2012 directory, this should fix GreenSpider icons into Revit 2012.


 

Licenza Creative Commons
GreenSpider by Simone Garagnani is licensed under a
Creative Commons Attribuzione – Non commerciale – Condividi allo stesso modo 3.0 Unported License
.
Based on a work at www.tcproject.net.
 

Info

Dal 2004 questo piccolo angolo di rete raccoglie gli interessi di ricerca e i lavori di sperimentazione digitale di Simone Garagnani in materia di cultura geek, ma soprattutto di Building Information Modeling, rilievi digitali ad alta risoluzione e computer graphics legata al mondo dell'architettura, dell'ingegneria e delle costruzioni. TC Project, è presente anche sul social network Facebook.

 

Welcome to these pages that host since 2004 Simone Garagnani's personal blog, a collection of nerd notes and geek experiences focused sometimes on Building Information Modeling, terrestrial laser scanning, digital photogrammetry and computer graphics applied to the AEC world. The TC Project is also available on Facebook.


Segui le attività in TC Project: Registrazione
Follow TC Project activities: Registration/login

GreenSpider

GreenSpider

GreenSpider plug-in for Autodesk Revit

Free download here (latest release)

Cerca!

Categorie

  • English (23)
  • Italiano (4)
  • Ingegneria (9)
  • Architettura (13)
  • Design (0)
  • Ricerca e sviluppo (27)
  • Eventi (24)
  • Pubblicazioni (8)
  • Materiali didattici (5)
  • GreenSpider (10)
  • Berkeley (15)
  • Pixar (4)
  • Retrocomputing (4)
  • SGI (5)
  • Keio (3)
  • Serious fun (8)
  • Archivi

    Ultimi commenti

    Trevor Dwyer (VIC-20 The friend…): Hi there, I feel your pain on updates and the internet not being the same these days – well since 199…
    SiliconSimon (Cray-1 - The home…): If someone is interested in my little Cray’s files, please PM me since I do not often read comments o…
    SiliconSimon (Cray-1 - The home…): Of course Mike, I sent you a PM!
    Robert (Cray-1 - The home…): If it’s possible, I would love to get the files from you for this project. I have a Cray-1 chip sitti…
    Mike (Cray-1 - The home…): Are the files still available?
    MojaMonkey (SGI VW540 @ TC La…): Hi Simon? This is a long shot but I was wondering if you have a copy of the SGI drivers required to…